W25N01G 源代码
5星
- 浏览量: 0
- 大小:None
- 文件类型：None
简介：
W25N01G源代码是一段神秘而精炼的标识符，可能指向特定软件、程序或系统的内部编码结构，揭示其技术细节与创新之处。
以下是重写后的代码声明：
```c
uint8_t Program_verify(uint8_t* buff1, uint8_t* buff2, uint32_t count);
void WB_Serial_NAND_Pageprogram_Pattern(uint8_t addh, uint8_t addl, uint8_t* program_buffer, uint32_t count);
void WB_Serial_NAND_Program_Excute(uint8_t addh, uint8_t addl);
/* 状态检查 */
uint8_t WB_Check_Embedded_ECC();
uint8_t WB_Check_Program_Erase_Fail_Flag();
uint8_t WB_Read_Serial_NAND_StatusRegister(uint8_t sr_sel);
void WB_Serial_NAND_ReadyBusy_Check();
uint32_t WB_NAND_Read_JEDEC_ID();
uint8_t WB_Serial_NAND_bad_block_check(uint32_t page_address);
void WB_Serial_NAND_LUT_Read(uint16_t* LBA, uint16_t* PBA);
/* 堆栈函数用于W25M系列 */
void WB_Die_Select(uint8_t select_die);
/* 状态设置 */
void WB_Enable_Embedded_ECC();
void WB_Disable_Embedded_ECC();
void WB_Enable_Buffer_mode();
void WB_Disable_Buffer_mode();
void WB_Serial_NAND_StatusRegister_Write_SR1(uint8_t SR1);
void WB_Serial_NAND_StatusRegister_Write_SR2(uint8_t SR2);
void WB_Serial_NAND_StatusRegister_Write_SR3(uint8_t SR3);
void WB_NAND_Reset();
void WB_Protect();
void WB_Unprotect();
void WB_Serial_NAND_LUT_Set(uint16_t LBA, uint16_t PBA);
/* 块擦除函数 */
void WB_Serial_NAND_BlockErase(uint8_t PA_H, uint8_t PA_L);
/* 读取函数 */
void WB_Serial_NAND_PageDataRead(uint8_t PA_H, uint8_t PA_L);
void WB_Serial_NAND_Normal_Read(uint8_t addh, uint8_t addl, uint8_t* buff, uint32_t count);
void WB_Serial_NAND_Continuous_Normal_Read(uint8_t* buff, uint32_t count);
```
全部评论 (0)
